Sprinkler repair in Salt Lake City

A sprinkler system rarely fails all at once. It fails one head, one valve, one cracked fitting at a time — and the lawn tells you before the controller does. We find what is actually wrong and fix that.

Get My Free Estimate Call (801) 381-5591

The six failures behind most repair calls

Broken and sunken heads

The most common call of all. A head gets clipped by a mower, cracked by a hard freeze, or slowly sinks below grade until it sprays into the sod instead of over it. Replacement is quick; the part worth getting right is the nozzle, because the wrong one leaves a dry arc that looks like a completely different problem.

Valves that will not close

If one zone keeps running after the controller shuts off, the valve is usually the culprit — grit lodged under the diaphragm, a failed solenoid, or a weak spring. A valve stuck open can run for hours unnoticed and show up on the water bill before it shows up on the lawn.

Dry spots and brown stripes

A dry patch is a symptom, not a diagnosis. It can be a clogged nozzle, a head that has rotated out of alignment, pressure loss somewhere upstream, or heads spaced too far apart to overlap properly. We check coverage zone by zone rather than swapping parts and hoping.

Leaks you cannot see

A soggy patch that never dries, a section of grass greener than the rest, or a water bill that jumped without a change in schedule — all point to a line or fitting leaking underground. Finding it precisely is what keeps the repair small.

Controller and wiring faults

A zone that will not start is not always a valve. Broken wire, corroded splice, or a failed station output on the controller produce the same symptom. Tracing the wire first avoids digging up a valve that was fine all along.

Mainline breaks

The line upstream of the valves is under pressure constantly, so a break there does not wait for a watering cycle. This is the one that counts as an emergency: shut the water off at the main and call.

How a repair visit actually runs

  • We run the system zone by zone. Most problems are visible once the water is on and someone is watching the right sprinkler at the right moment.
  • We diagnose the cause, not the symptom. A dry corner and a leaking lateral can look identical from the driveway. They are not the same repair.
  • You get a quote before anything is touched. Free estimate, plain language, no work starts until you say so.
  • We test every zone before leaving. The system runs a full cycle so you can see the fix working.

Most repairs are done in a single visit. When a job needs a part that is not on the truck, you will know that on the spot rather than after the fact.

Signs worth a call this week

None of these fix themselves, and every one of them gets more expensive the longer it runs.

  • A patch of lawn that stays soggy days after the last cycle
  • Water bill up without any change to the watering schedule
  • A zone that will not start, or one that will not stop
  • Heads that mist or fog instead of throwing a solid stream — usually pressure too high
  • Water pooling around a head or bubbling up between them
  • Brown stripes between green ones, in the same zone

A mainline break is different. If water is surfacing when the system is off, shut the water off at the main and call (801) 381-5591. The phone is answered around the clock.

Why systems here fail the way they do

Salt Lake valley water is hard, and that mineral content ends up as scale inside nozzles and filter screens. It is the reason a zone can lose coverage gradually over a season without anything visibly breaking — and the reason nozzle cleaning is part of every tune-up rather than an upsell.

The freeze–thaw cycle does the rest. Any water left sitting in a lateral, a valve body, or a backflow assembly over winter expands when it freezes and splits whatever is holding it. Most of the spring repair calls we take trace back to a system that was never properly blown out in the fall.

Clay-heavy soil shifts as it wets and dries, which slowly pulls heads out of level and stresses fittings that were tight the day they went in.

Questions we get asked

How much does a sprinkler repair cost?

Every job starts with a free estimate, so you know the price before any work begins. Our reviews mention fair pricing for a reason — several customers ended up paying less than they were quoted elsewhere.

How fast can you get here?

Most estimate requests get a same-day response, and many repairs are scheduled within a couple of days. For an irrigation emergency such as a mainline break or a valve stuck open, call — the phone is answered around the clock.

Can you work on a system you did not install?

Yes. Most of the repairs we take on are systems someone else put in, some of them decades old. We diagnose what is there rather than pushing a replacement.

Do I need to be home for the repair?

Not always. What we do need is access to the timer — that is the one thing the work cannot go ahead without. If yours is mounted outside, or you can run it from your phone, we can usually get on with it while you are out. If it is indoors, someone has to let us in. As a fallback we can work straight from the valves, but valve boxes are sometimes buried or hard to locate, so it is slower and not something to count on.

Where we handle sprinkler repair

Salt Lake City is home base — 84116. We work across the valley and into south Davis County.

  • Salt Lake City
  • Rose Park
  • Glendale
  • North Salt Lake
  • Bountiful
  • West Valley City
  • Taylorsville
  • Murray
  • Millcreek

Not sure whether your address is in range? Call (801) 381-5591 and ask — we answer Monday to Friday, 7 AM to 8 PM. You can also see the full service area map on the homepage.

System Installation

New systems, drip lines, and smart controllers built for Utah summers.

Learn more

Fall Winterization

Water off and every line blown out before the first hard freeze.

Learn more

Spring Start-Up

Lines pressurized slowly, every head checked, controller reprogrammed.

Learn more

Get it diagnosed before it gets expensive.

Every job starts with a free estimate, so you know the price before any work begins. Most estimate requests get a same-day response.

Request a free estimate Call (801) 381-5591

CALL NOW FREE ESTIMATE